Ethtool - 기술

문서의 이전 판을 선택했습니다! 저장하면 이 자료로 새 판을 만듭니다.

{{tag> ethtool }}
====== Ethtool======

<file bash>
# ethtool -i enp0s25
driver: e1000e
version: 6.8.8-4-pve
firmware-version: 0.13-4
expansion-rom-version:
bus-info: 0000:00:19.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
</file>

<file bash>
# ethtool  enp0s25
Settings for enp0s25:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Supported FEC modes: Not reported
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised pause frame use: Symmetric Receive-only
        Advertised auto-negotiation: Yes
        Advertised FEC modes: Not reported
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                             100baseT/Half 100baseT/Full
                                             1000baseT/Full
        Link partner advertised pause frame use: Symmetric
        Link partner advertised auto-negotiation: Yes
        Link partner advertised FEC modes: Not reported
        Speed: 1000Mb/s
        Duplex: Full
        Auto-negotiation: on
        Port: Twisted Pair
        PHYAD: 1
        Transceiver: internal
        MDI-X: off (auto)
        Supports Wake-on: pumbg
        Wake-on: g
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: yes
</file>

편집 요약

참고: 이 문서를 편집하면 내용은 다음 라이선스에 따라 배포하는 데 동의하는 것으로 간주합니다: CC Attribution-Noncommercial-Share Alike 4.0 International

연결문서