차이

문서의 선택한 두 판 사이의 차이를 보여줍니다.

--- tech:arduino_joystick_for_x-wing_alliance [2016/12/28 10:26] – V_L
+++ tech:arduino_joystick_for_x-wing_alliance [2024/07/16 04:29] (현재) – [아두이노 조이스틱 (Arduino Joystick For X-wing Alliance)] V_L
@@ 줄 1: / 줄 1: @@
 {{tag>arduino joystick for x-wing alliance}}
-====== 엑스윙 얼라이언스를 위한 아두이노 조이스틱 (Arduino Joystick For X-wing Alliance) ======
+======아두이노 조이스틱 (Arduino Joystick For X-wing Alliance) ======
-{{INLINETOC}}
 [[/game/x-wing_alliance]]가 스팀으로 발매되었지만 게임패드가 없으면 실행도 안되고 [[tech:joystick|조이스틱]]이 없으면 실질적으로 진행이 불가능하다.
@@ 줄 7: / 줄 7: @@
 그래서
-만들겁니다.
+만들것이다.
+  * 아날로그 조이스틱 -> USB조이스틱
+  * 버튼 <del>6개</del> 추가 (스틱에 2개, <del>본체에 4개</del>) -> 키보드가 같이 있어야 하므로 본체 버튼은 별 필요 없는 듯
+  * 쓰로틀 추가
 =====준비물=====
@@ 줄 18: / 줄 22: @@
 https://www.arduino.cc/
+https://www.arduino.cc/en/Tutorial/Button
+https://www.arduino.cc/en/Tutorial/AnalogInput
 http://www.instructables.com/id/Arduino-LeonardoMicro-as-Game-ControllerJoystick/?ALLSTEPS
@@ 줄 26: / 줄 33: @@
 http://html5gamepad.com/
+----
+https://github.com/controllercustom/JoystickWin
+=====배선=====
+  * 노랑 - 그라운드
+  * 빨강 - 단추1
+  * 주황 - 2
+  * 보라 - 3
+  * 회색 - 4
+====저항연결법====
+{{https://www.arduino.cc/en/uploads/Tutorial/AnalogReadSerial_sch.png?300}}
+{{https://www.arduino.cc/en/uploads/Tutorial/PhotoResistorA0_schem.png?300}}
+====버튼연결법====
+{{https://www.arduino.cc/en/uploads/Tutorial/button_schem.png?300}}
+[[http://www.instructables.com/id/Arduino-Button-with-no-resistor/?ALLSTEPS|저항없이 버튼 연결하는 방법]]
+{{https://cdn.instructables.com/F2N/SZUM/IBL629K9/F2NSZUMIBL629K9.MEDIUM.jpg?300}}
+초기화를 다르게 해줘야 한다.
+=====코드=====
+<file cpp>
+/*
+  Wingman Extreme Analog Joystick Modification
+   Arduino Leonado or micro is needed
+  // http://www.instructables.com/id/Arduino-Button-with-no-resistor/?ALLSTEPS
+   Note: on most Arduinos there is already an LED on the board
+  attached to pin 13.
+*/
+#include "Joystick.h"
+// https://github.com/MHeironimus/ArduinoJoystickLibrary
+// Create Joystick
+Joystick_ Joystick(JOYSTICK_DEFAULT_REPORT_ID,
+                   JOYSTICK_TYPE_JOYSTICK, 10, 1,
+                   true, true, false, false, false, false,
+                   false, true, false, false, false);
+/*
+  uint8_t hidReportId,   uint8_t joystickType,  uint8_t buttonCount,  uint8_t hatSwitchCount,
+  bool includeXAxis,  bool includeYAxis,  bool includeZAxis,  bool includeRxAxis,  bool includeRyAxis,  bool includeRzAxis,
+  bool includeRudder, bool includeThrottle,  bool includeAccelerator,  bool includeBrake,  bool includeSteering
+*/
+// constants won't change. They're used here to
+// set pin numbers:
+const int ledPin =  13;      // the number of the LED pin
+const int hatSwitch = 0;
+// variables will change:
+int buttonState = 0;         // variable for reading the pushbutton status
+int xAxis;
+int yAxis;
+int hatRead;
+void setup() {
+  // Set Range Values
+  Joystick.setXAxisRange(-127, 127);
+  Joystick.setYAxisRange(-127, 127);
+  Joystick.begin();
+  // initialize the LED pin as an output:
+  pinMode(ledPin, OUTPUT);
+  // initialize the pushbutton pin as an input:
+  for (int button = 0; button < 10; button++)
+  {
+    pinMode(button, INPUT_PULLUP);
+  }
+}
+void loop() {
+  /*
+     analog axis
+  */
+  xAxis = (analogRead(A0) - 512) / 4;
+  yAxis = (analogRead(A1) - 512) / 4;
+  Joystick.setXAxis(xAxis);
+  Joystick.setYAxis(yAxis);
+  /*
+      Throttle
+  */
+  Joystick.setThrottle (analogRead(A2)) ;
+  /*
+     Hat switch
+     http://www.epanorama.net/documents/joystick/pc_joystick.html#connector
+  */
+  int hatRead = analogRead(A3);
+  // not pressed : 82kohm 107-108
+  // 0 : 200ohm 1003
+  // 90 : 20kohm 333-334
+  // 180 : 41kohm 195-196
+  // 270 : 61kohm 140-141
+  if ((hatRead > 900)  ) {
+    Joystick.setHatSwitch(hatSwitch, 0);
+  }
+  if ((hatRead > 300) && (hatRead < 360)) {
+    Joystick.setHatSwitch(hatSwitch, 90);
+  }
+  if ((hatRead > 180) && (hatRead < 220)) {
+    Joystick.setHatSwitch(hatSwitch, 180);
+  }
+  if ((hatRead > 130) && (hatRead < 160)) {
+    Joystick.setHatSwitch(hatSwitch, 270);
+  }
+  if (hatRead < 120) {
+    Joystick.setHatSwitch(hatSwitch, -1);
+  }
+  /*
+     Buttons
+  */
+  // read the state of pins:
+  for (int i = 0; i < 10; i++) {
+    // check if the pushbutton is pressed.
+    // http://www.instructables.com/id/Arduino-Button-with-no-resistor/?ALLSTEPS
+    buttonState = digitalRead(i);
+    if ((buttonState == LOW)  ) {
+      Joystick.pressButton(i  );
+      // turn LED on:
+      digitalWrite(ledPin, HIGH);
+    } else {
+      Joystick.releaseButton(i );
+      // turn LED off:
+      digitalWrite(ledPin, LOW);
+    }
+  }
+}
+</file>
+=====미세조정 하는 방법=====
+{{:tech:arduino_joystick_for_x-wing_alliance_3509.png}}
+=====기타=====
+윈도우 설정에서 못 찾겠으면,
+> joy.cpl
+을 실행해 볼 것.
+{{:tech:arduino_joystick_for_x-wing_alliance_1455.png}}
-http://www.instructables.com/id/Arduino-Button-with-no-resistor/?ALLSTEPS
+{{:tech:arduino_joystick_for_x-wing_alliance_3754.png}}
-to be continued...
+=====스타워즈 스쿼드론=====
+^버튼^작용^
+|1|발사|
+|2| 전방적 선택|
+|3|좌측 보조무기|
+|4|우측 보조무기|
+|5|목표 전환|
+|6|대응무기 발사|